MAKEFLYEASY FIGHTER 2430MM UAV FIXED WING

NOTE: If you are failed to place order directly from our web shop, pls contact our sales team to get support. 

This item is the KIT Version and does not include any electronic devices, the description Images are for reference only. 

This is the Hand Launch Version that can be built as a twin motor with motors on each wing or as a single motor in the nose. 

KIT Version Package Included: 

1x Fighter 2430mm Wingspan EPO Portable Aerial Survey Aircraft RC Airplane KIT

PNP Version Package Included: 

2x 3520 kv500 Motor

2x 6S 60A ESC

5x Emax ES3054 Servos

1x  Emax ES08MD Servo for Parachute cabin

2x APC1510 Propeller CW&CCW

1x Customize 6S UBEC 6V10A

• Material: EPO, EVA, carbon fiber, engineering plastics, etc.
• Wingspan: 2430mm
• Fuselage height: 180mm
• Fuselage length: 1450mm
• Wing area: 72.5dm2
• Disassembly method: tool-less disassembly and assembly
• Load compartment size: 280*160*110mm
• Transport box size: 1.25m×0.34m×0.49m
• Max. takeoff weight: 11.5kg
• Max. payload: 1.5kg

• Take-off and landing method: hand-throw parachute landing/slide landing
• Practical lift height: 4000m
• Wind resistance: Class 5
• Recommended flight speed: 17~20m/s
• Stall speed: 10m/s (test conditions: Altitude 500m, 10.5kg takeoff weight)
• Maximum range: 250km (test conditions: Li-Po 6S 44000mah, 0.6kg load)

Feature:

EPO material both lightweight and durable.

Hatch cabin inching design making it convenient and reliable.

Bigger and more reasonable fuselage capacity.

ESC hatch cover can be removed making it easy to replace the ESC.

Aileron servo can be removed, no need to modify the servo cable.

Bottom buffer layer design to reduce landing impact and protect fuselage and camera.

Ergonomic design of rear fuselage to make lifting easier and throwing more stable.

Support tilt photography, meet the 1:1000 and 1:1200 aerial survey.

Support hand throwing and parachute landing fall. 

Installation Attention:

- In the welding of high current connector, we must pay attention to the welding line sequence to correspond to each other, so as not to burn ESC and servo.

- Recommend to use the Emax ES3154 digital servo, or other servos with the same size and servo horn, easy to install the servo and the installation of the vertical stabilizer quick release device.

Flying Attention:

- Please avoid flying and swerving at 10m/s, so as to avoid stalling.

- Before the flight please be sure to check the motor and the propeller are installed correctly and secure, the ESC signal line and the power cord plug connection are reliable